Swing Check Valve 100mm ANSI 300LB 159xu
Class: ANSI 300LB
Size Range : DN100 (4″)
Body : (WCB) Cast Steel
Disc : Carbon Steel with 13% Chromium and Hard faced seat, Stellite Seat
Dewater Products based in Perth Western Australia specialise in the supply of Swing check valve, non-return valve for pipeline flow control.
DN100 ANSI 300LB Check Valve 159xu
Swing Check Valve primed metal class 300lb not epoxy coated a commonly used check valve which has a disc internally which swings on a hinge and securing pin hence the name Swing Check Valve, and depending on the greater flow direction it will either open pushing the disc upwards or close by the disc falling down. Reverse flow or back flow occurs when the pump has shut down or pump failure occurs and the material being pumped flows backwards due to gravitational force. This can also happen if the Gate Valve or Butterfly Valve has failed or not closed. Forward flow from the pump allows the fluid to open the disc and pass through the valve correctly. A Swing Check valve will protect your pump and drive system from reversing, preventing reverse flow from the fluid you are pumping.
A swing check valve is a very robust heavy duty check valve, being full bore, no pressure losses occur when using a gate valve. The swing check valve can come in a range of materials such as Ductile Iron (DI) Cast Iron (CI) Cast Steel (WCB) Stainless Steel and more. The seat material which absorbs the slamming effect of the disc closing and also seals the fluid, can vary also from a resilient seat material like EPDM, to hard chrome. The hard chrome seat is best for abrasive materials, as it is much more hard wearing.
Swing Check Valves are CE approved, ISO approved, API-6D approved.
Dewater Products supply Swing Check Valves in all sizes, materials and classes. Contact us if you require a certain Swing Check Valve.